How to reset the Wifi Inventory Reader easily ?

To reset the WiFi module 2 procedures are available:

• Reboot the device: it is used to reinitialize the communication with the access point.

• Reset the device to Invengo default factory settings: it is used when you can no more communicate with the reader due to incorrect WiFi settings.

Both reset procedures are available by software via the WEB or TELNET interface.

Open

The reset button is located underneath the WiFi Inventory Reader as shown in the picture below. A thin object such as a paper clip or a needle must be used to push the reset switch.

Open

Your device is now reseted to default factory settings.

The default IP adress is 192.168.0.2