Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Invengo Serial To Keyboard is a special software designed to send data from a reader device in a Standalone Mode.

  • Open the Serial to Keyboard aplication: 

  • The following window shows how to configure the communication:

  • Select the correct number of the communication port and the corresponding speed for communication

  • Begin sending data by clicking on "Start"

  • Open Excel table or notepad

  • Place the cursor on your file

  • Now you can receive the frames from your RFID System.

  • The characters (ID) received from the tag must be in Hexadecima. If you have received IDs with other characters like below, check if the "Shift key" on your keyboard is not pushed ON or if the communication speed (Baudrate) is the same than the reader.

  File Modified
No files shared here yet.
  • No labels