Invengo Serial To Keyboard Software
Olivier Bouteau
Rebecca Sonu
Invengo Serial To Keyboard is a special software designed to send data from a reader device in a Standalone Mode.
Open the Serial to Keyboard aplication:
The following window shows how to configure the communication:
Select the correct number of the communication port and the corresponding speed for communication
Begin sending data by clicking on "Start"
Open Excel table or notepad
Place the cursor on your file
Now you can receive the frames from your RFID System.
The characters (ID) received from the tag must be in Hexadecima. If you have received IDs with other characters like below, check if the "Shift key" on your keyboard is not pushed ON or if the communication speed (Baudrate) is the same as the one of the reader.
| File | Modified | |
|---|---|---|
|
ZIP Archive Tagsys Serial To Keyboard Converter Installer 1-2-0.zip |
Jun 23, 2020 by Olivier Bouteau | |
| Mar 31, 2022 by Rebecca Sonu | ||
|
ZIP Archive Tagsys Serial To Keyboard Converter Installer 2-0-0.zip |
Mar 31, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151324.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151330.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151314.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151327.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151418.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151441.png |
May 10, 2022 by Rebecca Sonu | |
|
PNG File image-20220510-151517.png |
May 10, 2022 by Rebecca Sonu |
