[EN] - How to set up PX Explorer for simultaneous reading of different types of chips

When reading manually through Px Explorer, it is only possible to select one type of chip at a time.

On the other hand, you have the possibility of putting this reader in autonomous mode (Standalone Mode), and to select, at that moment, a simultaneous reading of different types of chips.

All you have to do is check your types of chips (Scan chips), configure the type of communication in "message format" (Frame format and communication speed) and check "Standalone at power on"

Instructions:

1. Put the reader in Standalone Mode

2. Check the types of chips to read (choose from C210, C220, C240, C270, C320, ISO15693, ePC, UID) from the “Scan chips” tab

3. Configure the “Message format”

4. Check “Standalone at Power on”

Open