EPSON TM20III Driver [En]

Owned by Olivier Bouteau
May 09, 2022
3 min read

User Manual

Installation : Please refer to pages 11 to 15 of the User Manual

 

IMPORTANT :

  • Install using administrator privileges.

  • Before starting the installation, exit all running applications.
    .

APD6 cannot use TM printers that have DHCP and other dynamic IP addresses. Set a fixed IP
address. An IP address can be set for the TM printer when installing APD6. You can also set a
temporary IP address when installing APD6 and change the IP address later.

Install by following the procedure below.
1 Double-click the APD6 installer (APD_6xx_xxx.exe) to start the installation process.
2 The "Check Installation" screen appears. Check the Note information.
Verify the computer environment, and click [Next] to continue.

 

Installation is recommended while the TM printer is disconnected.

3 Follow the on-screen instructions to proceed with the installation process.
4 The "EPSON TM Printer Settings" screen appears.

From [1. Select Printer], select "New Printer".



5 From [2. Printer], check the name of the TM printer. Make any needed settings.

6 From [3. Communication Settings] - [Port Type], select the port of the TM printer.
Make the required settings for each port.

7 Under [4. Apply], make the following settings, and click [Save Settings].

8 The TM printer that was set appears in [1. Select Printer].